8×8APD阵列激光三维成像接收机研制

为了实现对目标的无扫描阵列激光三维成像并研究系统参数对三维成像距离分辨率的影响,研制了8×8 pixel激光三维成像接收机。接收机采用线性模式APD阵列,设计了模拟信号放大、阈值处理将回波光信号转换为数字信号后,利用FPGA设计实现64通道高精度阵列计时系统,实现了对目标的无扫描实时三维成像功能。首先对设计完成的三维成像接收机组成及成像原理进行了介绍,对三维成像接收机中APD探测器阵列信号的模拟处理和数字处理流程和实现方式进行了说明。随后分别对三维成像的核心FPGA计时系统及探测器整体进行了电子学测试和实验测试。测试结果表明,FPGA计时子系统的时间分辨率优于140 ps,三维成像系统整体距离分辨率在0.2 m左右。最后对分辨率的误差进行了分析,结果表明,激光回波强度波动是影响此接收机距离分辨率的最主要因素。     

多探测器拼接成像系统实时图像配准

依据已设计完成的基于同心球透镜的四镜头多探测器阵列拼接成像系统,对该系统图像拼接配准过程所采用的特征检测提取、特征向量匹配与筛选、空间变换模型参数估计等算法进行了研究。首先,采用Fast-Hessian检测子提取参考图像和待配准图像的特征点,并生成加速鲁棒特征(SURF)描述向量。接着,采用快速近似最近邻(FANN)逼近搜索算法获得初始的匹配点对,并对匹配点对特征向量的欧式距离进行排序。然后,参照成像系统光学设计参数设定合理的阈值,筛选并保留下较好的匹配点对。最后,提出了一种改进的渐进式抽样一致性(IPROSAC)算法对空间变换矩阵模型进行参数估计,从而得到参考图像与待配准图像的空间几何变换关系。实验结果表明:该算法对图像尺寸、旋转和光照变化都具有一定的不变性,特征匹配时间为0.542 s,配准变换时间0.031 s,配准误差精度小于0.1 pixel,可以满足成像系统关于图像配准实时性和准确性的要求,具有一定的工程应用价值。     

Friction factors of finite and infinite square arrays of roughened pins

Friction factors of square arrays of roughened pins in smooth channels have been measured for a range of pin pitch to diameter ratios and roughness heights and for different sizes of array. The influence of the smooth channel has been removed in two ways; by extrapolating the results for a fixed pitch-to-diameter ratio to an infinite number of pins and by calculation from the finite array results. The resultant friction factors are compared with each other and with data obtained by testing single pins in smooth circular channels and transforming by various methods to the fully rough situation.     

Interaction of elastic waves with a periodic array of collinear inplane cracks

A boundary integral equation method is applied to the study of the interaction of plane elastic waves with a periodic array of collinear inplane cracks. Numerical results are presented for the dynamic stress intensity factors. The effects of the wave type, wave frequency, wave incidence angle, and crack spacing on the dynamic stress intensity factors are analyzed in detail. The project supported by the Committee of Science and Technology of Shanghai and Tongji University     

Viscous Flow Past a Periodic Array of Spheres

Viscous flow past an infinite periodic array of rigid spheres is considered. The hydrodynamic interaction of all the particles in the array is taken into account. An analytical solution of the problem is proposed. The forces exerted by the fluid on the array particles are calculated and an expression for the velocity of fluid filtration through the array is obtained. The results are compared with the previous theoretical and experimental results.     

Combining Organometallic Reagents,the Sulfur Dioxide Surrogate DABSO,and Amines: A One‐Pot Preparation of Sulfonamides,Amenable to Array Synthesis

We describe a method for the synthesis of sulfonamides through the combination of an organometallic reagent, a sulfur dioxide equivalent, and an aqueous solution of an amine under oxidative conditions (bleach). This simple reaction protocol avoids the need to employ sulfonyl chloride substrates, thus removing the limitation imposed by the commercial availability of these reagents. The resultant method allows access to new chemical space, and is also tolerant of the polar functional groups needed to impart favorable physiochemical properties required for medicinal chemistry and agrochemistry. The developed chemistry is employed in the synthesis of a targeted 70 compound array, prepared using automated methods. The array achieved a 93 % success rate for compounds prepared. Calculated molecular weights, lipophilicities, and polar surface areas are presented, demonstrating the utility of the method for delivering sulfonamides with drug‐like properties.     

Fabrication,Characterization and Optical Properties of TiO2 Nanotube Arrays on Boron-doped Diamond Film Through Liquid Phase Deposition

TiO2 nanotube（TiNT） arrays were deposited on boron-doped diamond films by a liquid-phase deposition method with ZnO nanorod arrays as the template.The different morphologies of TiNTs have been obtained by controlling the morphology of ZnO template.The X-ray diffraction and energy-dispersive X-ray analysis show that the ZnO nanorod array template has been removed in the TiNTs formation process.The crystalline quality of the TiNTs is improved by increasing the annealing temperature.The band gap of the TiNTs is about 3.25 eV estimated by the UV-Vis absorption spectroscopy,which is close to the value of bulk TiO2.In the photoluminescence spectrum,a broad visible emission in a range of ca.550-750 nm appears due to the surface oxygen vacancies and defects.     

Determination of the transplacental transfer of paclitaxel and antipyrine by high performance liquid chromatography coupled with photodiode array detector

Ex vivo placental perfusion experiments are important in understanding the quantity and mechanisms of xenobiotic transport to the fetus during pregnancy. Our study demonstrates that paclitaxel and antipyrine concentrations in placental perfusion medium containing physiological concentrations of human serum albumin during pregnancy (30?mg/mL) can be quantified by RP-HPLC and UV detection. A liquid-liquid extraction method was developed for the quantification of paclitaxel and celecoxib (internal standard) from perfusion medium. Antipyrine, which is a necessary marker in placental perfusions for determining the validity of experiments and calculating the clearance index of xenobiotics, was also analyzed by HPLC and UV detection. Antipyrine concentrations were determined by HPLC after precipitating the perfusion medium in acetonitrile and separating the precipitated proteins by centrifugation. Concentrations were fitted to linear regressions with R² values approaching 1. Lower limits of detection for paclitaxel and antipyrine were 100?ng/mL and 200?ng/mL, respectively. Both methods demonstrated high intra-day and inter-day precision and trueness. Additionally, the use of these methods was demonstrated in a placental perfusion experiment using Taxol^® (paclitaxel dissolved in Cremophor-EL). The fetal transfer rate of Taxol was 6.6% after 1 hour.     

Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.